Precision QC & Compliance Matrix
Quality is not an afterthought at Nexus Chemico Industries — it is engineered into every raw material batch, automated mixing cycle, and destructive shear pull-off test in Morbi, Gujarat.
4 Pillars of Blending Precision
Our multi-stage quality control protocol ensures every bag dispatched from Morbi meets the highest structural standards.
Raw Polymer Spectrometry
High-purity redispersible polymer powders, chemical cross-linkers, and quartz silica sand are audited for moisture content (<0.5%) and exact chemical purity.
Rheological Slump Calibration
During automated blending, slurry wet density, Brookfield rotational viscosity, and thixotropic shear yield are calibrated for effortless trowel glide.
Destructive Pull-Off Testing
Digital 50 kN hydraulic pull-off machines test tensile adhesion across initial dry state, after 21 days water immersion, and following 70°C heat aging.
Moisture-Barrier Packaging
Automated bagging with check-weigher auditing and hermetic multilayer lamination protects powder formulations against tropical humidity and premature hydration.
EN 12004-1 & EN 12004-2:2017 Comprehensive Test Matrix
| Testing Parameter & Standard Method | Standard Requirement |
NX-07 Class C1T |
NX-25 Class C2T |
NX-55 Class C2TE |
NX-92 Class C2TE S1 |
|---|---|---|---|---|---|
|
Water Mixing Ratio
Amount of water used for preparing adhesive
|
Gravimetric Ratio | 19% (3.8L/20kg) | 21% (4.2L/20kg) | 22% (4.4L/20kg) | 24% (4.8L/20kg) |
|
Vertical Slip Resistance (T)
EN 12004 Clause 8.2 (Mean slip displacement)
|
≤ 0.50 mm | 0.38 mm ✓ | 0.40 mm ✓ | 0.29 mm ✓ | 0.32 mm ✓ |
|
Initial Tensile Adhesion (Dry 28 Days)
EN 12004 Clause 8.3 (Pull-off test on concrete slab)
|
C1: ≥ 0.5 N/mm² C2: ≥ 1.0 N/mm² |
0.81 N/mm² ✓ PASS | 1.21 N/mm² ✓ PASS | 1.22 N/mm² ✓ PASS | 1.21 N/mm² ✓ PASS |
|
Tensile Adhesion after Water Immersion
EN 12004 Clause 8.3 (Tested after 21 days immersion)
|
C1: ≥ 0.5 N/mm² C2: ≥ 1.0 N/mm² |
0.85 N/mm² ✓ PASS | 1.17 N/mm² ✓ PASS | 1.16 N/mm² ✓ PASS | 1.16 N/mm² ✓ PASS |
|
Tensile Adhesion after Heat Ageing
EN 12004 Clause 8.3 (Thermal exposure resistance)
|
C1: ≥ 0.5 N/mm² C2: ≥ 1.0 N/mm² |
0.88 N/mm² ✓ PASS | 1.15 N/mm² ✓ PASS | 1.17 N/mm² ✓ PASS | 1.05 N/mm² ✓ PASS |
|
Tensile Adhesion after Freeze-Thaw Cycles
EN 12004 Clause 8.3 (25 continuous freeze-thaw cycles)
|
C1: ≥ 0.5 N/mm² C2: ≥ 1.0 N/mm² |
0.70 N/mm² ✓ PASS | 1.13 N/mm² ✓ PASS | 1.14 N/mm² ✓ PASS | 1.08 N/mm² ✓ PASS |
|
Open Time Tensile Adhesion (28 Days)
EN 12004 Clause 8.1 (Tensile strength after open time)
|
≥ 0.5 N/mm² (≥20 min C1 / ≥30 min E) |
35 Min
0.64 N/mm² ✓
|
Standard Pot Life |
45 Min (E)
0.63 N/mm² ✓
|
40 Min (E)
0.62 N/mm² ✓
|
|
Transverse Deformation (S1 Class)
EN 12004 Clause 8.6 (Flexural deformability)
|
2.5 mm to 5.0 mm | — | — | — | 2.8 mm ✓ S1 CLASS |
|
Vasai Lab Test Report Number
Issued 18/11/2025 by VASAI LAB (TEST)
|
Independent Audit | VST-33486-TR-827798 | VST-33486-TR-827801 | VST-33486-TR-827800 | VST-33486-TR-827799 |